Numerical experiments of watershed-scale soil water movement and bedrock infiltration using a physical three-dimensional simulation model

Numerical experiments of soil water movement and bedrock infiltration based on a simplified simulation method were conducted to analyze watershed-scale rainfall-runoff processes. To verify the model accuracy, it was applied to a Minamitani watershed (0.45 ha). The simulation was performed with 2.5-m space grids horizontally and five cells vertically. Results of long-term calculation of this model proved that this simulation model is robust and demonstrated good computational water mass conservation. Calculation results showed the best agreement with observed hydrographs and the number of groundwater levels simultaneously when laboratory-tested soil hydraulic characteristics for topsoil were used and infiltration into bedrock was included in numerical calculations. Numerical experiments show that bedrock infiltration generated a stable base flow and suppressed the secondary discharge peak. The reproducibility achieved by observed soil hydraulic characteristics with the assumption of bedrock flow demonstrates the effectiveness of the simulation model used in this article for analyses of watershed-scale soil water movements.     

Characteristics and decomposition rates of pruning residues from a shaded coffee system in Southeastern Brazil

In the Zona da Mata Mineira of Southeastern Brazil the development of sustainable land requires the integration of crops with trees. The objectives of this study then were to (i) characterize prunings from the main tree species in an agroforestry system; (ii) determine the effects of the physical and chemical characteristics of the prunings on their decomposition patterns in the laboratory; (iii) assess the effect of mixing leaves of different species on decomposition rates; and (iv) propose a decomposition index for the residues studied. The study was carried out with pruning residues from Cajanus cajan, Solanum variable, Cassia ferruginea, Piptadenia gonoacantha, Croton urucurana, and Melinis multiflora. The materials were characterized for total C, N, P, Ca, Mg and K contents; lignin, cellulose, hemicellulose and soluble polyphenols contents. The pruning residues had high polyphenols and lignin contents, high C:N and C:P ratios, and low contents of Ca, Mg, and K. The low decomposition rates of the prunings were related to the P, K, hemicellulose and polyphenol contents. The rates of N mineralization from most of the residues indicate that there is a potential to supply the needs of a crop of maize. The residues of some species, if decomposed alone, would not supply sufficient nutrients, and need to be mixed with leaves of other species.This revised version was published online in November 2005 with corrections to the Cover Date.     

SBELTS: A model of soybean production under tree shelter

Farmers in the North Central region of the United States often are reluctant to use shelterbelts because of inadequate information clearly showing their benefits. We developed a computer model, called SBELTS for ShelterBELT and Soybeans, that simulates the influence of a shelterbelt on soybean (Glycine max L.) production across an agricultural field in the midwestern United States. Objectives of this study were to 1) describe the structure of SBELTS, 2) present model simulations, and 3) discuss model limitations. SBELTS is composed of three submodels. The first submodel produces characteristics of a shelterbelt that are passed to the second submodel that estimates daily windrun at user-specified distances leeward (away from the prevailing wind) of the shelterbelt. Estimated daily windruns are merged with other microclimatic information to produce weather files for each specified distance. Finally, the third submodel uses a soybean growth/yield model to estimate soybean yield at specified distances, and the yields are averaged. Data collection was not a part of the present project, so SBELTS was evaluated by comparing predicted results with published information. SBELTS was used to predict soybean yield across a field leeward of a 7.6 m tall shelterbelt, and the predicted yield curve compared well with published yield curves. The sensitivity of SBELTS to variation in rainfall was evaluated by predicting yields for 3.8 m tall and 7.6 m tall shelterbelts in wet, normal, and dry years. Results showed no shelterbelt influence in wet years, some influence in normal years, and a sizable influence in dry years. Results showed that the 7.6 m shelterbelt had more influence than the 3.8 m shelterbelt. Although SBELTS has limited use, it is the first step in the development of more advanced models that will be able to simulate production of soybeans and other crops under the influence of shelterbelts on a variety of soil types.This revised version was published online in November 2005 with corrections to the Cover Date.     

The method for designing the profile of forest roads supported by genetic algorithm

This study examines a method for designing an optimum profile of a forest road in a short matter of time. In this method, a genetic algorithm (GA) searches for points where the gradient changes and dynamic programing (DP) designs the longitudinal slope. This method can be applied to the ground heights of an actual forest road. The evaluation function of the DP assesses the total expenditure. The inverse of this function is the fitness function. Crossover and mutation are operators of an evolution simulation of a GA. They are each repeated 20 times and 420 profiles are designed and assessed, all within about 10 min. A comparison of the profile designed by the GA with that of an actual forest road shows only one section where the formation level differed substantially. Overall, both profiles seem to show a high degree of correspondence. From this result, we believe that the profile designed by the GA is best, or the one of the best. A conventional method takes about 65 h to calculate all changing points of gradients. However, by using the GA, the calculation time was reduced to about 1/389 that of the coventional method, showing that the method which uses the GA through the profile design is very useful.     

Characterization of wood-based multi-material systems under dynamic impact stress

ABSTRACT

Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were dynamically sudden loads, in the form of impact bending and dart drop tests (penetration and impact mode). It has been shown that the use of the reinforcing materials leads to a significant improvement in material properties. The penetration energy of the composites reinforced with the aramid fiber fabric could be increased by 43%. The maximum force in the dart drop test (impact mode) could be increased by 29% with the stainless steel foil, the damping decreased by 48%. The aramid fiber reinforcement achieved an increase in impact resistance by 27% in impact bending test, the steel reinforced achieved an increase of 39%. A clear dependency on both, the climate and the adhesive within the composite, could be demonstrated.     

Promoting old-growth characteristics and long-term wood production in Douglas-fir forests

Trade-offs among wood production, wood quality and ecological characteristics in the management of harvested forest stands are explored through model simulation of various silvicultural regimes. Long-term production of merchantable wood, production of various types of high-quality wood, and the level of certain quantitative ecological indicators are projected for coniferous forests of Pacific Northwestern USA. The set of ecological indicators used is based on the species composition and physical structure of old, unlogged forest stands. Simulations are performed with an ecological model of forest stand dynamics that tracks the fate of live and dead trees. Short rotations (<50 years) produce the least amount of high-quality wood over the multi-century simulation period. They also fail to generate ecological attributes resembling those of old forest stands. Production of high-quality wood is moderate to high under all rotations of 80 years or more; however, most ecological indicators require longer rotations unless alternatives to clearcutting are applied. Alternatives examined include retention of 15% cover of live tree canopy at each harvest in combination with artificial thinning between harvests. Thinning from below can expedite the development of large live and dead trees, and canopy height diversity without greatly diminishing wood quantity or quality. Proportional thinning retains understory stems, thereby expediting the recruitment of shade-tolerant trees. A possible drawback to thinning, particularly proportional thinning, is the diminished production of clean-bole wood at rotations of 150 and 260 years. It is concluded that most wood quantity, wood quality and ecological objectives can be met with long rotations (ca. 260 years). Certain objectives can be met with shorter rotations (80–150 years) when treatments of thinning and canopy tree retention are applied.     

Study on dynamics of stem form of Korean pine trees in natural forest stand

INTRODUCTIONThcstcmfonl1ofnaturalKorcanpincforcst.ot\ingtothcsupprcsscdandshadcd,isvcry'difTcrcntt`iththatofplantation.Itis\'cry't'aluabIctostud}'thcstcmfonnforn1orcac-knot`lcdgcabouttl1ctrccd)-nan1icsofnaturalKorcanpinc.n1crcl1asbccnconsidcrabIcrescarchontl1cstc111for111cquationsasatoolforforcstmanagcmcnt,butitalmostbasnorclationshipt`-iththcbiologicalgrowthproccss.soitisx'ery'dimcuIttouscthccquationtoanalxrsisthcd\'amicsofstclllform.Hcrcthcdct'clopmcntofstcmformt"ascxPCctcdfornotonI\…     

落叶松人工林间伐技术优化研究*

本文以林分生长模型为基础，将林分的经营指数作为状态变量，将主伐时林分平均直径作为目标，将达到这一目标时林分总收获蓄积量作为指标函数，建立了离散确定性动态规划模型，编制了计算机模拟系统。利用此系统即可对落叶松不同培育目标下的最佳间伐时间、间伐强度和主伐年龄等进行决策。结果表明，优化决策方法在保留株数、间伐次数和总收获蓄积量上都优于一般决策方法，它既可对落叶松林分进行生长预测，也可为制定经营单位的经营     

Application of an airborne laser scanner to forest road design with accurate earthwork volumes

In this study we developed a forest road design program based on a high-resolution digital elevation model (DEM) from a light detection and ranging (LIDAR) system. After a designer has located the intersection points on a horizontal plane, the model first generates the horizontal alignment and the ground profile. The model precisely generates cross-sections and accurately calculates earthwork volumes using a high-resolution DEM. The model then optimizes the vertical alignment based on construction and maintenance costs using a heuristic technique known as tabu search. As the distance between cross-sections affects the accuracy of earthwork volume calculations, the results were examined by comparing them with the exact earthwork volume calculated by the probabilistic Monte Carlo simulation method. The earthwork volumes calculated by the Pappus-based method were similar to those calculated by the Monte Carlo simulation when the distance between cross-sections was within 10m. The model was applied to a high-resolution DEM from the LIDAR of Capitol Forest in Washington State, USA. The model generated a horizontal alignment, length 827m, composed of five horizontal curves. We examined the number of grade change points. The results indicated that tabu search found the best solution ($61.42/m) with five grade change points. This was composed of two vertical curves that almost followed the ground profile. As the accuracy of a high-resolution DEM from LIDAR increases, the model would become a useful tool for a forest road designer because it eliminates or at least reduces the time-consuming process of road surveys.     

中低强度间伐对杆材阶段马尾松林生物量的影响

对杆材阶段不同密度的马尾松林在低强度间伐后生物量的动态变化进行了分析对比，结果表明间伐后平均木的单株生物量和各器官生物量随密度增加而减少；随林分年龄的增加，单株生物量与树干、皮、根的生物量因积累而增大，但枝、叶的生物量先增加后减少，在林分年龄为20a时达到最大值，随后又接近间伐前的数值；林分生物量随年龄增加而增加，其中密度为3000株